Suit yourself. My point was they have made progress, but you seem to know better so I'll just back away.
Mark, the whole "keep rebooting" thing is a bit like suggesting to the passengers of the Titanic that they dry themselves off one more time and see if that helps with the drowning problem.
that is hilarious!!!!
@MarkJFine I know I'm being a jerk here, and it really shouldn't be directed at you. But my work keeps me near the IT support realm, and as I'm sure you know, asking users to reboot their equipment in many cases is a way to make them feel like some sort of change is being made and to get them off your back for a while. In this case, if some change had been made to the HughesNet system that was going to alleviate this performance issue, I'm sure they'd be remotely rebooting CPEs and/or letting customer service know that reboots are required.
My Beam 68 troubles have not ended, but I find it strange that my speed tests using the Hughes site seem to have dramatically changed for the better. Now showing I am getting 25mbs or better at all times. Mean while, if I use any other test service within minutes of testing on Hughes, I show a max of only 4mbs. Sounds hinky to me.
The only reason I even run a speed test is because my service is so slow. Too see my Hughes speed test showing all is well seems disengenious at best. See my attached screen shots. Please note, for whatever reason, the speed test on Hughes show up as 3 hours earlier than actually performed. All these tests were within minutes of each other, not 3 hours apart.
Is anything going on to fix beam 68 or am I just pouring money out for 4mbs while being charged for 25mbs or better?
This reply isn't concerning your speed issues, but instead the ads seen in your pictures. Ads can use a good deal of your data, and every MB matters when you have a service with a soft data cap. You should consider installing an ad blocker, like Adblock Plus or uBlock Origin. The former is the most popular, but both work well. They're also both free.
And though ad blockers aren't going to help with your overall speed, they can have the effect of webpages loading a little more quickly, as they no longer have to load the ads.
With regard to your speed tests, it has been noted recently that testmy.net is having issues with HughesNet, so contrary to what has been instructed for a long time, please avoid testmy.net. Feel free to try other speed tests, like speedtest.net. I've been trying speedtest.net lately and it's been giving me fairly accurate results. With this said, please avoid fast.com (Netflix's speed test), as it mimics streaming and causes the Video Data Saver to engage, skewing your speed test results. In addition, if you turn the VDS off to make it more accurate, fast.com uses a tremendous amount of data for its speed tests (upwards of 80MB or so), so again, it's best to avoid it.
Thanks for the response Gabe, I will look into adblockers.
Testmy is the only test results I pictured, but I actually used speedtest.net as well and got similar results. I will re-run my tests and do new results.
My speed is so slow that most items in my house that rely on internet don't even operate. I have several echo dots that just says, "Sorry, I've lost connection to the internet" on most occasions. I have a Nest thermostats that more often than not will say, "Off Line" when I go to check my house temps or make changes. I have Nest smoke and carbon detectors that say, "Off Line". I have a roomba vac that says, "could not connect to roomba, please try again later". But when I get up for work at 3:00am, everything is working just fine, till I get home from work and I'm sent back to the sixties and my Amish neighbors have more tech than I do.
I check my speed on Hughes, which seems to take forever to run, but shows me results of 25mbs or better at the same time as I'm getting all the messages that my whole house is off line. Even getting to websites to do other speed tests is slow, only to find out I am getting anywhere from .5mbs to 4mbs at the time on other sites.
Mean while, I see all these awesome commercials talking about blazing fast internet through Hughesnet. I have a smart house that is basically pretty dumb without connectivity. I'm not out of data, just to be sure, I pay extra for the 50gig plan. Still, not much happening at home. Hence the frustration with the service.
Keep in mind that the more things that are accessing the satellite, the slower it's going to be.
I used to have about 13 things hanging off it and it slowed to a crawl until I took off the DirecTV boxes, the Smart TV, and other things from being on it all the time. I now only connect devices that expect continuous internet to when I think they should be using the internet.
Another thing that will slow you down is not having the right wifi protocol set for each device, or if it's too far from the wifi router. Both may unduly restrict bandwidth, and therefore speed. Being too far away from the wifi router may likewise require numerous packet resends to overcome data errors . That will not only slow you down, it will increase your data consumption as well.
I should also add, that if you need an estimate of the wifi signal level wherever a smart device is, there's a handy signal meter in the HughesNet phone app. Because antennas on different devices are not going to be the same it may not be 100% accurate but it may give you an idea if a device is in a dead spot or not.
All you need to do is:
1. Switch your phone's wifi to the 2.4 or 5GHz channel that the device is using.
2. Start the HughesNet app.
3. Walk to the location of the device in question.
4. Choose the Wi-Fi tab on the app.
5. Clicking "Begin Test" should give you an indication of the wifi signal strength on the Gauge.