cancel
Showing results for 
Search instead for 
Did you mean: 

Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

Senior

Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

As suggested by others, I installed Glasswire on my Parallels version on Win7 running on my new Mac (High Sierra) so that I could have access to several programs that I want to use on Win7 rather than my new Mac for awhile. My data drain today is insane. Here's where I started 3 hours ago:

Screenshot 2018-02-07 10.22.00.png

 

Here's where I am now, several hours later and the Glasswire information:

Screenshot 2018-02-07 12.33.03.pngScreenshot 2018-02-07 12.33.40.pngScreenshot 2018-02-07 12.34.24.pngScreenshot 2018-02-07 12.34.41.png

I did download software which I can see on the graph - what I am wondering is if, when open, the Parallels software is using data, anyone got an answer or can look at the graph and give me some idea what the heck I am doing wrong for this incredible data drain?

Tags (4)
15 REPLIES 15
Assistant Professor

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

Unfortunately, Glasswire under that configuration is only going to measure the bandwidth used with Win7 in Parallels. It's not going to see what's going on outside of Parallels on your Mac, nor the other devices on your network (such as phones) that might be contributing to your data drain.

 

Obviously you have a Mac: for that I'd recommend you have all automatic updates turned off (except for antivirus or malware), as well as anything iCloud-related or Siri-related. And that's just a start.

 

Another place to look is for anything that uses cloud-based services like Google Docs. Keeping a browser open to anything like Google Drive, Sheets, or whatever will keep a live data stream that gets regularly updated.


* Disclaimer: I am a HughesNet customer and not a HughesNet employee. All of my comments are my own and do not necessarily represent HughesNet in any way.
Senior

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

Thanks @MarkJFine - but I need further help - I am DROWNING in data depletion - and there is nothing connected to the internet except 2 desktops (1 Mac, 1PC) and Dish. We are not streaming nor have we been except half a dozen times in the past 40 days, NONE in the past 7 days. Here is where I am since my last post:

Screenshot 2018-02-07 14.06.00.png

Per your comments: "Obviously you have a Mac: for that I'd recommend you have all automatic updates turned off (except for antivirus or malware), as well as anything iCloud-related or Siri-related. And that's just a start.

 

Another place to look is for anything that uses cloud-based services like Google Docs. Keeping a browser open to anything like Google Drive, Sheets, or whatever will keep a live data stream that gets regularly updated."

 

None of the above applies to any of the connected devices - auto updates are turned off, there is NO antivirus or malware currently installed on the new Mac, I don't use Google Docs, Drive or Sheets - thank you but PLEASE HELP ME FURTHER - I can't used Glasswire on my Mac, purchased PeakHour4 a few minutes ago for network monitoring but it doesn't recognize the Hughes Modem.

Tags (3)
Senior

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

@MarkJFine -- I may have found the culprit but can't find any answers online. My husband has the Dish DVR set to record a specific show series that is on every hour today - and has been running since this morning - is DISH DVR using the HughesNet bandwidth to record these shows? I read an article that said to disconnect the antenna on the Dish unit to force it to use the Dish bandwidth and I did so, the programs appear to continue to record - does this sound plausible or a possible reason for the drain? We have a number of shows set to record new and old issues on the DVR - is that the data drain, or possibly the data drain?

Assistant Professor

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

Short answer is that it depends.

 

If it's set to record off a specific channel in real time, then chances are it's using the Dish satellite TV feed, not the internet. If it's set to 'record' something that's 'on-demand' then it's actually downloading files from their media server. The first one shouldn't have an impact to your internet, but the second one certainly would.

 

I once used my phone to set my DVR to record a movie once, not realizing that I actually told it to pull-down an on-demand version (from HDNet Movies no less). I've disconnected my satellite TV receiver from the internet ever since.

 

You should be able to bring up a "to do" list on your DVR's recordings menu to see what it's actually doing. That way you can decide if you think you should cancel anything.


* Disclaimer: I am a HughesNet customer and not a HughesNet employee. All of my comments are my own and do not necessarily represent HughesNet in any way.
Senior

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

I have just been using the Internet to check a couple of bank accounts in the last hour after I disconnected the Dish antenna and NO, the Dish is using the satellite tv feed, not the internet. And my data keeps draining - checked every device in this house - nothing but the 2 desktops are connected now and the data continues to run WIDE OPEN - @Liz can you help me too? @MarkJFine is doing a terrific job but I can't seem to stop the data drain...

Screenshot 2018-02-07 15.27.33.png

Tags (4)
Advanced Tutor

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

Are you using the Hopper with your Dish service?

I can tell you that if you are, in order to fully disconnect your Hopper from your wifi, you will need to change your 'wifi' password and network name as this is the ONLY way to completely disconnect and prevent your hopper from automatically re-connecting, which it will do each and every time is detects your network if the password and network name remains the same.

The shows your DVR/Hopper is scheduled to record are probably being recorded via OnDemand...and this will chew through your HughesNet data like crazy.

Unlike most other devices, with the Hopper, there are no options available via the Dish/Hopper remote control that you can choose from to prevent the Hopper from automatically connecting...and there are no options which allows you to disconnect manually either.

 

your welcome to verify this information via the Dish's very own Support community which can be found via the Dish website.

 

Professor

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

That totally stinks about the Hopper.  It's ridiculous that people can't completely disconnect it when they want. 

@happytexann, you should turn off your modem at this point -- every time you post a screen cap, you have lost so much data! That's crazy.  You're going to eat up all your data and your token bytes. 

Senior

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

Thanks @maratsade and @bare65 -- I have changed the name of the network and password. AND I disconnected the desktop from the ethernet cable and am connecting via w-fi as last month I found a significant change in data drain from being connected to the ethernet rather than wifi with Hughes HT2000W - anyone else noticed that? And thank you @maratsade I know the screenshots are eating the data but I had to find out if anyone had answers and only way I know to post what is happening. THANK YOU ALL - @Liz can you help me with some data tokens since I was legitimately trying to find the drain using screenshots and the community?

Tags (1)
Highlighted
Professor

Re: Glasswire and huge data drain, can anyone help me figure this out? I am using WAY too much data!

@happytexann, I totally get it that you had to keep draining the data just to show it was draining.  It was just like, the drain was insane,  and I kept wanting to yell Nooooooooooo, like in movies, to stop the data drain. 

 

I'm tagging the mods below because your tag didn't stick.  

 

@Liz@Amanda