I upgraded from Gen4 to Gen5 about a month ago due to extremely slow speeds at various times, especially in the evening and during the weekend. With Gen4 it would quite often buffer when trying to stream, especially during those times, and the length of time each buffering lasted would range from annoying to not ending which required stopping and restarting the stream. This problem did not change when I switched to Gen5, which is very frustrating to say the least.
To help solve this problem I followed the instructions in: http://hninfo.us/speedtest and ran several speed tests on different days and at various times of the day using testmy.net. Below is some information on the setup for these tests:
PC setup with Windows 10 and Chrome
Disabled the wifi on the HT2000W
Disconnected my router
Connected the PC directly to the HT2000W with an Ethernet cable
Nothing else was running on the PC
Here is the URL with the test results:
Let me know if there is any more information you need to help solve this problem.
This is really good feedback, I know our engineers are going to want to review this. Let me send this over to them and we'll let you know what the next steps will be.
Your cooperation, patience, and understanding are much appreciated.
That would be great if the engineers can have a look.
I have tried editing the format of that message a number of times but to no avail.
Does there happen to be a limit on the length of a post? The original post had 563 words, the longest I have written, and included a picture of a small table from Excel. I tried using just characters for the table and ended up with 583 words.
Thank you for looking into this.
Good morning lakeland4,
There should be a character limit, but one would get an error message if trying to post something exceeding the limit.
If you can read this it means I have developed a work around to finally post my system performance observations taken from the end of May through early July.
As I stated in my 5/25/2022 post, the overall system performance had significantly improved since the dish was repointed on 4/25/2022. However, the overall system performance since the end of May is as bad as it was prior to the repointing of the dish at the end of April.
Service stops and starts intermittently
Since the end of May the overall service has intermittently stopped and restarted. When attempting to access the internet all devices will suddenly hang. You may eventually receive an error such as ‘This site cannot be reached’ or the downloading of files will fail. This issue may last for a few minutes or up to several hours before the service will function properly. Many times I have tried to reboot the devices, turn both the router and modem off and on with no improvement in the service.
Sun. 6/12 – 10:45am – Attempted to watch church service on Vimeo – Continually buffered and was unable to watch
Sun. 7/2 – 10:45am – Watched church service on Vimeo. Ran fine - only buffered once for a few seconds
Fri. 7/1 – 7:15pm – Attempted to watch a video on Prime Video. Extremely pixelated, twice buffered for around 30 seconds then got the ‘Slow Internet Connection on TV’ error. Stopped watching
Sat. 7/2 – 7:00pm – Attempted to watch a video on Prime Video. Pixelated and got the “Slow Internet Connection on TV” error as well as 8 different errors before stopped watching.
Download speeds are much slower
The data from the small sample of speed tests that I have run with testmy.net, nothing else running on the PC, no other devices, etc. is shown in https://testmy.net/quickstats/kilroy.
Below are the dates and times when the download speeds were recorded in June. The times shown are when first attempting to run testmy.net and when the Hughesnet service was finally operating well enough for the data to be collected.
Tue. 6/7 – 7:00pm to 8:30pm
Thu. 6/9 – 9:30am to 1:00pm
Fri. 6/10 – 3:30pm to 5:15pm
Sat. 6/11 – 9:00am to 2:00pm
The measured download speeds in June were significantly slower than the speeds in May.
As stated at the beginning, the overall system performance since the end of May through early July has been as bad as it was prior to the dish being repointed at the end of April. Most of the live and video streams were not able to be viewed and the service stopping and restarting made even typical web browsing and checking of email unavailable at times nearly every day.
The question that needs to be answered is:
When will the overall system performance be back to what it was immediately after the dish was repointed at the end of April and until the end of May?
This has forced me back to asking what I can do to assist HughesNet as this problem is being corrected.
I look forward to your response.
My message finally posted!
Since early July I have made a dozen changes to my message trying to get it to post. None of these attempts made any significant changes to the overall format or length of the message.
I got to thinking that my last couple of posts worked and were much shorter than the one that kept failing to post. I reviewed my previous messages that did post and the longest one had a character with spaces count of 2650. The message that would not post had a character with spaces count of 3295. I guessed the limit was 3000, so this last time I edited the message to lower the character with spaces count to 2917 and it posted!
What looks to be the cause of my message not posting is that there is a character with spaces limit at or slightly above 3000. If that is the case, there is no actual error message. The message you are attempting to post just does not post. I did search the HughesNet websites and did not find a limit mentioned anywhere.
I deeply appreciate the HughesNet Community’s help in solving the problems that I have faced since early June in both connecting to and posting to this topic. The issues and solutions are described in the topics ‘Cannot Connect to ‘Upgraded to Gen5 and speeds are still extremely slow at times’’ and ‘Cannot Post to ‘Upgraded to Gen5 and speeds are still extremely slow at times’’.
Now we can get back to solving the issues listed in my previous post.
EDIT: There has been an update to the ‘Cannot Post to ‘Upgraded to Gen5 and speeds are still extremely slow at times’’ topic.
During the past 4 weeks the observed overall system performance is still not as good as it was between the repointing of the dish at the end of April through the end of May but has improved somewhat over what was described from the end of May through early July in the 7/22/2022 post:
The intermittent service stops and starts are less frequent and have not lasted as long but are still occurring.
There have been no significant problems with the live and video streams as listed below:
7/10/2022 – 10:30 – Church service on Vimeo – Set quality to 240p - Slow loading but no problems afterwards
7/24/2022 – 10:30 – Church service on Vimeo – Set quality to 240p - Slow loading, afterward only buffered once for less than 10 seconds. Otherwise no problems
7/31/2022 – 9:30 – Church service on Vimeo – Set quality to 240p - No problems
7/24/2022 – 7:00 to 10:00 – Watched three 45 minute shows on PBS.org. Set quality to 360p. No problems.
The observed download speed over the past 4 weeks is still noticeably slower than between the repointing of the dish at the end of April through the end of May but has improved somewhat over the speed from the end of May through early July.
I will keep you updated.
Please have enough respect for the OP and those trying to help to not drop yet another one of your complaints on yet another topic that is not yours.
If you're looking for help, please start your own topic. If you're just looking to complain, please use some other place, like social media, and leave this support forum to its purpose... support.