What are you seeing that shows that the signal is unstable? When you lose your internet, can you connect to the System Control Center? If so, are both boxes at the top green? All green check marks?
Are you presently seeing any State Codes here under the System State Code Monitor? If you see a lot of them, can you post a snapshot or a screenshot? Make sure to edit your SAN out of the picture. If you don't know how to post a picture, you can just list the codes you see.
Current state code 0.0.0
Last error 30.1.1
Time since recovery 0.1:58:48.
I cannot do a speed test; it says "network communication issues".
I try to play online games but I keep getting "unstable connection, check your connection or try later". I have tried connecting modem directly to computer and through a router and get the same results. This has been an ongoing problem since 11/22. Very frustrating. Have called support 4 times and keep getting disconnected before problem is solved.
That state code concerns your Web Acceleration. You should try turning it off to see if it makes any difference. The following is the directions for such.
Please follow the directions below to disable Web-Acceleration.
1: Visit http://192.168.0.1 in your web-browser.
2: Click the "i" icon at the top of the HT1100/2000w System Control Center (also known as the SCC). It is highlighted in red in the image below.
3: Click on "Web Acceleration" then "Control" outlined in red.
4: Click on "Web Acceleration Enabled", this will change to an orange button that says "Web Acceleration Disabled".
5: Restart your browser and try using the service that isn't working, please let us know how that works for you.
Last thing to try. Turn your computer off, unplug the modem, wait for about a minute, plug the modem back in, then wait for about five minutes and turn the computer back on (waiting the five minutes gives the modem a chance to fully boot before you turn the computer on). If the problem is still there after that I'll go ahead and tag the reps, who can then run remote diagnostics and such on your HughesNet equipment to see what, if anything, looks amiss.
Edit: Instead of WiFi (if you are presently using WiFi), it would be best to connect the computer with a LAN cable before turning it back on, as that will give it the best connection possible.
Also, just so you are aware, the reps on here are not the same as the reps on the phone. These are corporate based reps, so if they need to get involved you can rest assured that they will work to solve your issue.
Okay, I'll go ahead and tag the reps, as they're going to need to help you. If you don't already, it would be best to leave the modem on so that they can run remote diagnostics on your HughesNet equipment. The reps are on M-F from approximately 8AM to 5PM EST. Sorry I couldn't be of much help.
Good morning bumsdw,
Thanks for posting and welcome to the community! For the most part your diagnostics look good. I do want to get you on our latest modem, the HT2000w. I'm having one shipped at no extra cost to you.
Your new HT2000W modem will arrive within 5 business days. Once you receive the modem, connect and power it on up to an hour so it will activate automatically. You do not need to return the old modem. Please dispose the old modem properly according to your local waste management guidelines. To check the status of your order, go to rmastatus.hughesnet.com where you can use your SAN and zip code to track your shipment.
Please let me know how the new modem works out for you.
Your cooperation, patience, and understanding are much appreciated.
Did my post answer your question? Accept as Solution to help others find it faster.--------------------------------->
I have yet to receive new modem. Can you advise as to the zip code it was sent? I can get no information from the RMA page.