cancel
Showing results for 
Search instead for 
Did you mean: 

HELP! ATA ERROR HSC008

Highlighted
New Member

HELP! ATA ERROR HSC008

Received ATA via UPS (as the one the installer brought apparently didn't work), followed the instructions, repeatedly, with no luck. Found a post relating to installation of ATA as opposed to replacement, followed those directions. Getting Error HSC008. Repeatedly.  This is ridiculously frustrating.   HughesNet Modem Serial #83 0010905286 ac    Thank you
14 REPLIES 14
Highlighted
Moderator
Moderator

Re: HELP! ATA ERROR HSC008

Good morning ketchikanmd,

Thanks for posting and providing this info, let me look into this for you. 

Your cooperation and patience are greatly appreciated. We look forward to hearing back from you.

Thanks,
Liz
If you have a tech or billing question and need help, please start a new thread in the appropriate board. Unsolicited Private Messages may not get replies.

Highlighted
New Member

Re: HELP! ATA ERROR HSC008

Thank you. As of this morning, it's still the same. ATA box has 2 of the 3 lights on.  Am using a wireless router.  Following install instructions. My husband informed me that this ATA box that you guys sent me looks just like the one the installer had brought and tried to install and said that we'd have to order one and that the type of box he had never works. (Now whether that's true or not I don't know, he wasn't that great of an installer and skipped several things that he should have done that we wound up having to do on our own).  ....... We can be reached at 509 945 0959.   The number associated with the account, (701) 339-5991 also works (for leaving messages),  but won't ring at our location as we're super remote and don't receive a strong enough signal.    ..........Which is why we want the HughesNet  phone service, so we can actually use a phone up here.  Thank you again.
Highlighted
Moderator
Moderator

Re: HELP! ATA ERROR HSC008

Hi ketchikanmd,

Thank you for this information, I was able to locate your account. From your description it sounds like you're using the Cisco ATA, if so, please reference this video to double check your connections: https://www.youtube.com/watch?v=LKEcrXqtsuE

A switched cable can result in the ATA not activating.

Once the connections are in place, please go to this URL to activate the ATA and follow the steps there: http://voice.hughesnet.com/activate/

The activation process can take up to 15 minutes or so; the ATA at that time has to download information from the server and such to complete the process.

A "Finish" screen show show up once activation is done, otherwise an HSC code should pop up with information on what happened. If you get another HSC code, please copy and paste the entire message and paste it here for my reference.

Normally the HSC codes have instructions for you to follow to resolve the error, so you may go ahead and do that, just let me know whether it helped or not.

Your cooperation, patience, and understanding are much appreciated.

Thanks,
Liz
If you have a tech or billing question and need help, please start a new thread in the appropriate board. Unsolicited Private Messages may not get replies.

Highlighted
New Member

Re: HELP! ATA ERROR HSC008

Nope.  Same error code.  
Highlighted
Moderator
Moderator

Re: HELP! ATA ERROR HSC008

What was the full text under the error code?
If you have a tech or billing question and need help, please start a new thread in the appropriate board. Unsolicited Private Messages may not get replies.

Highlighted
New Member

Re: HELP! ATA ERROR HSC008

Error HSC008

Your ATA is unable to communicate with the Hughes Activation System. Please click on the link below to return to the Information Page. Turn off power to the ATA, wait for 15 seconds, and reconnect power. Wait until the Power and Internet lights on the ATA are steadily lit. Now verify that your SAN, MAC address and Zip code entries are correct and click on Submit. If the error occurs again, please call Hughes Customer Support at 866-347-3292 assistance. Code HSC008

Return to Information entry page

Highlighted
New Member

Re: HELP! ATA ERROR HSC008

So I have repeated the same steps over and over and over and over and over and over and over. Perhaps even over. This is night #3.  Perhaps the installation person should come back and figure this out and get it to work. As the first (and only) installation attempt by the local rep. did not work, I would think having them come back out would still be covered by HughesNet..   Your thoughts?
Highlighted
New Member

Re: HELP! ATA ERROR HSC008

??????
Highlighted
Moderator
Moderator

Re: HELP! ATA ERROR HSC008

Good morning ketchikanmd,

The community is only moderated during business hours, I apologize for the delay.

This is not protocol, but considering these circumstances, I've dispatched a tech to bring a new ATA and to have that tech install and activate it for you.

Your dispatch is currently scheduled for Wednesday, Nov 9, 2016 between 11:00 and 15:00, our earliest available slot.

Call us at 866.347.3292 and reference case #101429284 if you need to reschedule. Please let us know how the site visit goes. 

Thanks, 
Liz
If you have a tech or billing question and need help, please start a new thread in the appropriate board. Unsolicited Private Messages may not get replies.