Forum Discussion

lake_woman's avatar
lake_woman
Senior
8 years ago

Cannot connect to wireless HP D110 printer with Gen5 wireless

The printer sees the 2.4 network but will not connect. I've entered the password correctly and also tried WPS. What do I do now?
  • C0RR0SIVE's avatar
    C0RR0SIVE
    8 years ago

    Your printer may not support the wireless security cipher the HT2000w uses by default...

    1: Visit http://systemcontrolcenter.com or http://192.168.0.1
    2: Click Wifi-Setting on the left
    3: Enter the password to access your wifi settings, by default it is   admin

    4: On the 2.4Ghz tab change the WPA Mode to WPA/WPA2, your cipher suite should change to TKIP+AES

    5: Try reconnecting the printer, using the password that is displayed in the password field on that section.

C0RR0SIVE's avatar
C0RR0SIVE
Associate Professor

Your printer may not support the wireless security cipher the HT2000w uses by default...

1: Visit http://systemcontrolcenter.com or http://192.168.0.1
2: Click Wifi-Setting on the left
3: Enter the password to access your wifi settings, by default it is   admin

4: On the 2.4Ghz tab change the WPA Mode to WPA/WPA2, your cipher suite should change to TKIP+AES

5: Try reconnecting the printer, using the password that is displayed in the password field on that section.

LKS's avatar
LKS
New Poster
8 years ago

Thanks for this - I had this problem as well and this took care of it. :)