Forum Discussion

TimS's avatar
TimS
New Poster
8 years ago

Is it possible to use a different router with gen 5's HT2000w?

  • GabeU's avatar
    GabeU
    8 years ago

    Absolutely.  Lots of folks do, actually.  You can connect a 3rd party router to any one of the LAN ports and use that for more ports or WiFi.  If you're going to use the 3rd party router for WiFi it would be best to turn off the competing WiFi band(s) (2.4Ghz or 5Ghz, or both) in the HT2000W so that the two WiFi sources aren't fighting each other.  

     

    The instructions for turning off the WiFi in the HT2000W are in the following PDF, under "How do I manage my built-in Wi-Fi modem?"

     

    http://customer.kb.hughesnet.com/Documents/1041318-0001_a.pdf

GabeU's avatar
GabeU
Distinguished Professor IV
8 years ago

Absolutely.  Lots of folks do, actually.  You can connect a 3rd party router to any one of the LAN ports and use that for more ports or WiFi.  If you're going to use the 3rd party router for WiFi it would be best to turn off the competing WiFi band(s) (2.4Ghz or 5Ghz, or both) in the HT2000W so that the two WiFi sources aren't fighting each other.  

 

The instructions for turning off the WiFi in the HT2000W are in the following PDF, under "How do I manage my built-in Wi-Fi modem?"

 

http://customer.kb.hughesnet.com/Documents/1041318-0001_a.pdf

  • TimS's avatar
    TimS
    New Poster
    8 years ago

    I knew that another router could be connected that way (once it was put into bridge mode), but all that gives you is more ports, and a different set of wifi radios.  What I'm really interested in is using a different router than the HT2000w for NAT and DHCP.  By connecting a different router to one of the HT2000w's lan ports you still must use the hughes box for NAT and DHCP.  The hughes router's NAT table is relatively small, only allowing up to 10 connections.

    After going thru the detailed menu's on the hughes box, it doesn't appear possible to use another router for NAT and DHCP.  Too bad hughes didn't design the HT2000w with an ethernet output port directly from the satellite modem, bypassing the internal router,  so a user could use the router of their choice, and not be limited to the electronics they chose to include in the same box.

    • MarkJFine's avatar
      MarkJFine
      Professor
      8 years ago

      Do other satellite internet companies do it differently?

    • C0RR0SIVE's avatar
      C0RR0SIVE
      Associate Professor
      8 years ago

      Are you an SME customer?

      The HT2000w doesn't have a bridge mode, you are stuck with the 10 potential forwards for NAT... If you are not an SME customer, it wont matter how big the potential forward is, because you are on CGN.

      • TimS's avatar
        TimS
        New Poster
        8 years ago

        No, I'm not a small or medium business enterprise, as I assume thats what you meant by SME.  Have Hughes as it's the only broadband option at the home where we will retire in a few months.  The HT2000w is somewhat constrained from a NAT perspective, and we have a number of wireless devices.  As I said earlier, it would be great if the Ht2000w had an output port directly from the satellite modem so a more capable router could be used for NAT and DHCP, and the hughes's internal router bypassed entirely.

        Any other  wifi router connected to the HT2000w's lan port will have to be placed into bridge mode.  The wifi of the HT2000w  would then need to be disabled, but by doing that you only get to use the wifi of the other wifi router which may, or may not be better than that of the HT2000w.

  • shawstad's avatar
    shawstad
    Freshman
    7 years ago

    hi! i have a netgear n750 that I was going to use with the ht2000w. 

    would you happen to know if the netgear n750 is capable of monitoring activity? i'd like to find out where all my data's going. thanks for any light you could shed!

      • shawstad's avatar
        shawstad
        Freshman
        7 years ago

        thanks! now am i disabling the broadcasting of all the networks on the ht2000w,and using the netgear to broadcast? sorry if my questions are lame but this is new territory for me and i really appreciate the help!

        love to learn!  =)