To answer your questions...
1: I wouldn't bother unless you want a more modern WAP with Wireless-AC and such.
2: Wouldn't hurt to get everything IPv6 compliant.
3: Remote access via IPv4 isn't possible, and remote access via IPv6 is a nightmare at best.
4: Wont work on Hughesnet over IPv4.
5: Remote access in general isn't possible with Hughesnet Residential services.
You may want to review the following topics.
https://community.hughesnet.com/t5/Tech-Support/HT2000W-IPv6-inbound-services/m-p/83342#M58814
https://community.hughesnet.com/t5/Tech-Support/Remote-access-of-security-cameras-REVISITED/m-p/84688#M59728
Thanks for the answers. Not exactly what I was hoping for...
After reviewing the links, it seems like remote access is really only possible if IPv6 is used throughout. One message in the link talked about putting an RPi in the system to doing the IPv6 DDNS work so I guess that is an option.
One thing that isn't clear is the willingness of HN to assign static IPs to business customers. Some posters claimed that HN was only assigning static IP addresses for legacy customers. I will be conducting business from this site and will need to VPN into the corp system. Does anyone know for sure that HN will (or will not) assign static IP for business customers?
VPN isn't supported on Hughesnet... If it works, it works, if it doesn't, then well...
As far as static goes... That has a complicated history.. In the past Hughesnet offered static IP to everyone for a fee, however, that changed when Gen4 launched and IPv4 addresses dried up. As of right now, the official word is, Static IP isn't available.
When using my own address to check business account availability, it shows the following....
So, it appears that static IPs are available for Gen5 SME plans.
The HughesNet Business plan website... https://business.hughesnet.com/
Additional info concerning SME accounts and static IP... https://business.hughesnet.com/taxonomy/term/271
Edit: Not to confuse you, but Corrosive may very well be right, even though it seems to conflict with what the site says. A rep should be able to give you a more definitive answer regarding SME accounts and static IPs. I'll tag the two that are on here most often so they are sure to see this thread when on again. Liz Amanda
GabeU wrote:
When using my own address to check business account availability, it shows the following....
So, it appears that static IPs are available for Gen5 SME plans.
The HughesNet Business plan website... https://business.hughesnet.com/
Additional info concerning SME accounts and static IP... https://business.hughesnet.com/taxonomy/term/271
Edit: Not to confuse you, but Corrosive may very well be right, even though it seems to conflict with what the site says. A rep should be able to give you a more definitive answer regarding SME accounts and static IPs. I'll tag the two that are on here most often so they are sure to see this thread when on again. Liz Amanda
I'm showing it also, wonder what it costs. Does seem sometimes the website developers are out of sync with actual availability. WIll be curiuos to see the official response.
BirdDog wrote:
I'm showing it also, wonder what it costs. Does seem sometimes the website developers are out of sync with actual availability. WIll be curiuos to see the official response.
I think it's one of those, "if you have to ask, it's too much" deals... Looks like it's something you must call in order to order it.
