Forum Discussion

TimS's avatar
TimS
New Poster
8 years ago

Is it possible to use a different router with gen 5's HT2000w?

  • GabeU's avatar
    GabeU
    8 years ago

    Absolutely.  Lots of folks do, actually.  You can connect a 3rd party router to any one of the LAN ports and use that for more ports or WiFi.  If you're going to use the 3rd party router for WiFi it would be best to turn off the competing WiFi band(s) (2.4Ghz or 5Ghz, or both) in the HT2000W so that the two WiFi sources aren't fighting each other.  

     

    The instructions for turning off the WiFi in the HT2000W are in the following PDF, under "How do I manage my built-in Wi-Fi modem?"

     

    http://customer.kb.hughesnet.com/Documents/1041318-0001_a.pdf

C0RR0SIVE's avatar
C0RR0SIVE
Associate Professor

Are you an SME customer?

The HT2000w doesn't have a bridge mode, you are stuck with the 10 potential forwards for NAT... If you are not an SME customer, it wont matter how big the potential forward is, because you are on CGN.

TimS's avatar
TimS
New Poster
8 years ago

No, I'm not a small or medium business enterprise, as I assume thats what you meant by SME.  Have Hughes as it's the only broadband option at the home where we will retire in a few months.  The HT2000w is somewhat constrained from a NAT perspective, and we have a number of wireless devices.  As I said earlier, it would be great if the Ht2000w had an output port directly from the satellite modem so a more capable router could be used for NAT and DHCP, and the hughes's internal router bypassed entirely.

Any other  wifi router connected to the HT2000w's lan port will have to be placed into bridge mode.  The wifi of the HT2000w  would then need to be disabled, but by doing that you only get to use the wifi of the other wifi router which may, or may not be better than that of the HT2000w.

  • C0RR0SIVE's avatar
    C0RR0SIVE
    Associate Professor
    8 years ago

    /shrugs/  Seeing as you are already behind a Double NAT thanks to CGN and the Router of the HT2000w, what's it going to hurt having yet another one?  Can't do port forwarding as a residential customer.  I have a PFSense box sitting between my network and HT2000w, it handles everything... I just treat their unit like another modem...

    BTW, the HN9000 worked the same way as the HT2000w.