cancel
Showing results for 
Search instead for 
Did you mean: 

MagicJack

Highlighted
New Member

MagicJack

My house phone is plugged into my modem via ethernet cable. I am able to hear them clearly but the person on the other end of the line cannot hear me. MagicJack says all that Hughesnet needs to do is change the UDP ports 5060 to 5070 on the modem. I dont know how big of issue this is for Hughesnet, it sounds simple

Thanks

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Distinguished Professor IV

Re: MagicJack

@bohannonrl 

 

Unfortunately, 3rd party VOIP systems do not tend to work well with HughesNet due to the high latency inherent to geostationary satellite internet.  Because of this, magicJack likely will not work properly.  

 

HughesNet does offer their own Voice service, however, which is specifically tailored to work with their service.


Ryzen 5 3400G | MSI B450M Pro-M2 MAX | 16GB Corsair Vengeance DDR4 3000 | XPG SX8200 Pro 512GB NVMe | Windows 10 Pro

View solution in original post

1 REPLY 1
Highlighted
Distinguished Professor IV

Re: MagicJack

@bohannonrl 

 

Unfortunately, 3rd party VOIP systems do not tend to work well with HughesNet due to the high latency inherent to geostationary satellite internet.  Because of this, magicJack likely will not work properly.  

 

HughesNet does offer their own Voice service, however, which is specifically tailored to work with their service.


Ryzen 5 3400G | MSI B450M Pro-M2 MAX | 16GB Corsair Vengeance DDR4 3000 | XPG SX8200 Pro 512GB NVMe | Windows 10 Pro

View solution in original post