Forum Discussion
Failing To Provide Service
"doing the same things repeatedly and expecting different results."
That's the definition of something..... LOL
I rebooted the HT2000W shortly after 8pm 9/2 Eastern time (0000 UT 9/3) and that is when I started to have the issue, so I am not sure if my reboot of the HT2000W was the start for me, or if it was at 0000 UT (8pm EST/6pm MT).
maratsade, did a reboot start the issue for you, or are you on mountain time?
I use a batch file to automate grabbing the logs from the HT2000W after it creates them at 0000 UT/8pm Eastern. I then use a spreadsheet graph to look at usage for each device and other numbers from the log, so I can see the SQF bounce all over and lose connection at the gateway after 8pm 9/2.
Ignore the 50+ Mbps numbers, they are caused when I reboot the HT2000W and the usage accumulators reset back to zero -- the spreadsheet here is treating it as a rollover of 32 bit integers, so in the graph it just creates the illusion of a data usage spike. This is because I rebooted, and stitched the logs together and is not related to the issue.
The dark blue line in the graph for SQF has gone crazy since 8pm 9/2 and when it gets too low connection is lost.
Hope this is resolved soon, but I was wondering if others can avoid it by not reseting/rebooting the HT2000W until the fix is in?
- maratsade7 years agoDistinguished Professor IV
MrBuster, I'm on Eastern time, and I realized the system was down in the evening, so I don't know exactly when it first went down. I checked the modem and about 3 lights were out. I rebooted the modem, and all the lights except System came back on. This morning (9/3) at around 6:30 am, System was still out. I rebooted the modem again, and also restarted the computer, and it was working. It's still a bit glitchy, though. Sometimes the connection cuts out, then it comes back. So, for me, the second reboot ended the issue. The first reboot did not.
- MrBuster7 years agoSenior
Thanks -- since you are eastern time and you first noticed the issue 6:30pm last night (9/2), it is apparent that we started to experiance the issue at different times. The issue did not start for me until I rebooted shortly after 8pm eastern time. From the graphs you can see my performance was excellent before 8pm (except for a short heavy rain at 5pm).
The issue causes intermitent connections because the satellite signal strength is all over the place -- so everything is working then when the SQF drifts too low there is a loss of connection for a few seconds while reassociating to the gateway.
Under the System Status screen, the 'Satellite Receive Signal Strength' value is the SQF in the log -- do you see your value jumping all over the place, or has it settled down to a constant value for you?
Thanks!
- maryd17 years agoNew Member
My connection(s) are still all over the place! Obviously, not all affected customers have been restored. I've re-booted numerous times and still can not maintain a connection. I'm in Ohio with sunny blue skies and more than frustrated with Hughes Net performance
Related Content
- 5 years ago
- 4 years ago
- 3 years ago
- 5 years ago
- 3 years ago