Gen5 SmartBrowsing?
Does Gen5 have SmartBrowsing like Gen4 did, or are the new, higher FAP speeds taking the place of "SmartBrowsing"?
Forum Discussion
Me either. I've got 21GB myself, and I want to keep them. I don't know if I will ever have a chance to use them, but I want to keep them, anyway. LOL.
And hey, maratsade, we're Tutors now! Yippee!!! :mantongue:
How did you build up so much data in tokens? I only have 4 - 500 MB tokens available in my account. I have had to use some in the past but not enough to add up to over 20 GB.
Just to make note I am currently on a Legacy daily usage plan.
Also I was wondering what HughesNet actually considers as a GB ... Is it 1024 or 1000 MB?
With the Free Zone if you go over the 50 GB limit does your usage get restricted to slower speeds the same as it would if any time data is exceeded? (Maybe someone that had Gen4 with SmartBrowsing can answer that). 50 GB seams pretty low ESP when coming from Unlimited free zone usage. -- with multiple computers and devices constantly needing updated and downloads I don't like the 50 GB limit!
Gen5 does not have a Normalized Power Word reading.
A value of 41 is within the normal parameters of the HN9000 system.
As for the dish pointing for Gen5, you can try the following site, but take it with a grain of salt as the heights and such may not be exactly correct when using the "show obstacles" option...
Make sure to change the satellite to "97.1W ECHOSTAR 19" and input your address. Change it to satellite view if not already on that. You may have to move the map around to locate your house.
Again, use this for only a general idea.
If you have an HN9000 modem then you are aimed at Spaceway-3 at 95'W.
Echostar 19 that that uses the HT2000w modem is located at 97.1'W.
I don't know if this might help, but take a look at SatFinder. It's for Android devices. https://play.google.com/store/apps/details?id=com.esys.satfinder&hl=en
From the looks of the pics when searching on Google pics, it looks like it might be something that could show you the same type of info. Scroll through the pics on the app's page, too. There are a couple that definiltey look like they would help.
As for a chainsaw, there wasn't a place I could rent one, and the cheapest one to buy was nearly $200, which I didn't have at the time. The people I was supposed to borrow one from never came through. I think they may have simply forgotten, but I didn't want to keep bugging them.
This is the tree that I had to cut down. And yes, Loppers. It was amazing that I could do it. You can see near the right edge of the picture, and closer than the tree in question, the stump of another one I cut down with them a few years back. It was one of those trees with HUGE, THICK thorns, and it got me every single time I mowed the lawn. I've gotten pretty adept at using the Loppers for things other than what they are made for. LOL.
BTW, I also cut down the smaller tree that's closer and to the left of the tree in question. It wasn't tall enough to be in the way yet, but in a few years it would have been. That's more like the size of the things the Loppers are meant for. :)
Another thing to consider is that look angle is considerably higher than the angle of the dish arm.
(graphic courtesy of Alan)
wildcats198308 wrote:How did you build up so much data in tokens? I only have 4 - 500 MB tokens available in my account. I have had to use some in the past but not enough to add up to over 20 GB.
Just to make note I am currently on a Legacy daily usage plan.
Also I was wondering what HughesNet actually considers as a GB ... Is it 1024 or 1000 MB?
With the Free Zone if you go over the 50 GB limit does your usage get restricted to slower speeds the same as it would if any time data is exceeded? (Maybe someone that had Gen4 with SmartBrowsing can answer that). 50 GB seams pretty low ESP when coming from Unlimited free zone usage. -- with multiple computers and devices constantly needing updated and downloads I don't like the 50 GB limit!
If you are asking me, I amassed 21GB from carrying over a couple of GBs from my legacy plan and receiving some GBs for testing of a router for Hughesnet, plus giving info on the instruction booklet for that router's setup for Hughesnet customers.
With Hughesnet, a GB is 1000MBs.
When you run out of data during the Bonus Bytes period and you have no Anytime Bytes or Token Bytes to draw from, SmartBrowsing will kick in if you have a Gen4 plan that has SmartBrowsing. It's the same as when you run out of Anytime Bytes during the 8AM to 2AM period and have no Token Bytes to draw from.
As for Gen5, it appears the Gen5 FAP has replaced SmartBrowsing, which is good as it appears that the Gen5 FAP speeds are higher overall and allow you to still do more than you could with SmartBrowsing, like watch Youtube videos and even stream in lower definition. You coudn't do that with SmartBrowsing. Being able to do such is not a guarantee or anything, just a logical conclusion based on the stated possible speeds of the Gen5 FAP.
As for the 50GB Bonus Bytes limit, unless you are/were one of the very few folks who actually utilized your download zone data each and every night for the full five hours, 50GB should be plenty. I thought of that, too, before upgrading from my legacy plan to Gen4. I calculated that, at full tilt, I could download/upload about 80GB or so per month with my legacy plan, and couldn't do that with the Gen4 plans available at that time. The thing is, in the eleven plus years that I had my legacy plan, I don't think I ever exceeded 15GB in a month, and that was an extreme month. Thus my thought of not being able to download as much as I could with my legacy plan, though true, was VERY skewed.
Again, though, this was for me and most others, as most don't use their legacy plan full tilt like that. A few do.
With all of that said, I've never used more than 12GB with Gen4 in any given month, and that month was due to the Anniversary Updates for two of the comptuers. Normally I use around 5GB combined. This is with keeping three computers (two W10 and one W8.1) up to date and browsing, paying bills, Facebook, Youtube, etc. I'm sure it won't be any different now that I have Gen5.
Most nights I am awake all night and I use a fairly large amount of data. Watching and streaming movies and doing updates on computers and other devices between 5 people including an 12 and 16 year old. (6 computers with win 10/7 - mainly usually only update 2 or 3 of them regularly - and have 2 Android tablets, 2 Kindle fire tablets, and multiple smartphones. Plus planning on getting an iPad in the coming months)
Just seams like a step backwards going to a 50 GB nightly limit. But the monthly (20 GB) is a slight step up with the current 375 MB daily current. Plus the faster speeds and i assume better multi user friendly. (With my current plan only can do one thing at a time). Also the speeds if limit is exceeded also would be step up!
wildcats198308 wrote:Also the speeds if limit is exceeded also would be step up!
That's the added bonus. For the most part, at least from what I have been reading, even the FAP speeds will be somewhat comparable to the speeds of many legacy plans and maybe even better.
I have yet to see anyone FAP their Gen5 system, so I haven't seen any actual numbers as of yet.
I know this is kinda off topic, but I have been curious to find out and don't know where to ask...
On my HN9000 system control center it shows Normalized Power Word. Mine is always around 41, is this normal or high for the HN9000? I never seamed to have issues with browsing or using the web or with signal strength. (Signal Strength is normally around 157).
Does Gen5 have a Normalized Power Word? If so what is yours with Gen5?
I have a group of trees in the direction the dish points and with researching the Echostar 19 satellite I believe my dish will need pointed a few degrees further west(?) and about 1 degree lower elevation plus the skew I believe is a few degrees different. I am concerned the trees may be an issue, ESP if my current Normalized Power Word being 41 is caused by them... The trees are not a real major problem they can be cut down if they are an issue. (The HN9000 systems use the Spaceway 3 satellite at 95°W correct?)
That is the site that I have been using. I was not sure what satellite my current system is on But I am pretty sure its Spaceway. The closest on the dish pointing site to the direction my dish is pointing is the Spaceway 3 so I assumed thats what I am on. Its good Echostar 19 is only a few degrees different from the Spaceway 3. Much more it could cause much more concern with trees in my area.
wildcats198308 wrote:Its good Echostar 19 is only a few degrees different from the Spaceway 3. Much more it could cause much more concern with trees in my area.
I ended up having to cut down a tree, and I can say with all certainty that the obstruction option on that site was incorrect when it came to the height for my tree at the distance it was away from the dish. Not just a couple of feet, but more than ten. Had I relied solely on that site, I would have left the tree in place, and had I done so I wouldn't have Gen5 right now.
