HughesNet Community

Cannot connect to wireless HP D110 printer with Gen5 wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
lake_woman
Senior

Cannot connect to wireless HP D110 printer with Gen5 wireless

The printer sees the 2.4 network but will not connect. I've entered the password correctly and also tried WPS. What do I do now?

1 ACCEPTED SOLUTION
C0RR0SIVE
Associate Professor

Your printer may not support the wireless security cipher the HT2000w uses by default...

1: Visit http://systemcontrolcenter.com or http://192.168.0.1
2: Click Wifi-Setting on the left
3: Enter the password to access your wifi settings, by default it is   admin

4: On the 2.4Ghz tab change the WPA Mode to WPA/WPA2, your cipher suite should change to TKIP+AES

5: Try reconnecting the printer, using the password that is displayed in the password field on that section.

wpa change ht200w.png

View solution in original post

4 REPLIES 4
C0RR0SIVE
Associate Professor

Your printer may not support the wireless security cipher the HT2000w uses by default...

1: Visit http://systemcontrolcenter.com or http://192.168.0.1
2: Click Wifi-Setting on the left
3: Enter the password to access your wifi settings, by default it is   admin

4: On the 2.4Ghz tab change the WPA Mode to WPA/WPA2, your cipher suite should change to TKIP+AES

5: Try reconnecting the printer, using the password that is displayed in the password field on that section.

wpa change ht200w.png

Thanks Corrosive!

Thanks for this - I had this problem as well and this took care of it. 🙂

Thanks so much for this post!!  We struggled for 2 days with this issue.  We used this and Viola!!!  We are printing!!!