Cannot connect to wireless HP D110 printer with Gen5 wireless

[lake_woman]

The printer sees the 2.4 network but will not connect. I've entered the password correctly and also tried WPS. What do I do now?

[C0RR0SIVE · Accepted solution]

Your printer may not support the wireless security cipher the HT2000w uses by default...

1: Visit http://systemcontrolcenter.com or http://192.168.0.1
2: Click Wifi-Setting on the left
3: Enter the password to access your wifi settings, by default it is   admin

4: On the 2.4Ghz tab change the WPA Mode to WPA/WPA2, your cipher suite should change to TKIP+AES

5: Try reconnecting the printer, using the password that is displayed in the password field on that section.

[lake_woman]

Thanks Corrosive!

[LKS]

Thanks for this - I had this problem as well and this took care of it. 🙂

[Sassy]

Thanks so much for this post!!  We struggled for 2 days with this issue.  We used this and Viola!!!  We are printing!!!