phone rings, and i pickup phone and hit the talk button to pickup phone. but then no sound from who ever is calling me.
if i call someone else, no sound from them, or me.
if someone calls me, it all goes to voice mail, and i can retreive information through the automated email that sends a couple of the voice mail.
internet works fine.
power green solid
run green solid
wan orange solid
lan orange solid
voip green solid
phone 2 black solid (no dail tone)
phone 1 orange blinking (dail tone)
Solved! Go to Solution.
I'm glad you found the community, thank you for posting and providing this initial information, it helps. I'll need more to narrow our focus even more.
Has this been happening ever since activating the VOIP service?
If not, when did this start?
Are you using a corded or cordless phone?
What's the MAC address printed on the bottom of your ATA?
One way audio can be caused by loose/improper connections. Please confirm that your ATA and phone is set up properly with cables secured on each end; it should look like this:
For detailed setup instructions, please check page 7 of your InnoMedia quickstart guide.
After ensuring all connections are secured, please let me know if that Phone 1 LED is still blinking orange.
Your cooperation, patience, and understanding are much appreciated.
first time this has happen since installation, installation guessing 6 months+ ago
nothing changed weeks prior and/or after problem started.
started day or so initial making of support request here on the forum.
cordless phone, i have a main station, and a base station (2 phones total) same issues on both cordless phones
i have also tried a corded phone. same issue.
serial number = 631165014768
mac = 00109933e1f2
Good morning boggen,
Thank you for posting back and letting me know it's working again for you. If you have the time, could you please share what fixed it, if you found out? This could help others with similar issues resolve them on their own.