About pswired

If you have some networking experience, you can probably get this to work with IPv6. Search this forum for the details of how to get external IPv6 access working to LAN devices with the buggy HT2000w. ... View more

Hi radiotrack1,   Thanks for your feedback. Not sure what's going on there with TeamViewer, as it's different from RDC, but I've sent your SAN over to engineering for them to investigate. I'll reach out once I have any news to share.    ... View more

@JWP524   Your best bet to get help with this issue would be to start a new topic in "Third Party Products", which you can do here....    https://community.hughesnet.com/t5/forums/postpage/board-id/ThirdParty ... View more

I have not experienced this lately but will post back here when/if it happens again. ... View more

@Solag   You location constantly changing is due to HughesNet using shared, rather than static, IPs, and those IPs changing on a regular basis.  Because the IPs used have different registration locations, your device location services will change accordingly.     ... View more

Good morning freeafrog,     Thanks for posting and welcome to the community! Thanks for bringing this to our attention, this is an old page; not sure why this is even still around. I've escalated this internally for our devs and management to address as they see fit. We suggest going to MyAccount>Usage in your Support Center to check your usage. ... View more

Well, just like Jim mentioned, and prepared me for..my download speeds have started dropping again...in just this past hour, they have dropped almost 50% I have no doubt by tonight, or early tomorrow, my speeds will be back in the 1-3 mbps range.   Unfortunatley, repointing me to Jupiter 1 is NOT an option...as we are outside of the J1 footprint. (I upgraded to Gen 5 / Echostar 19 back in June 2017 as a Spaceway 3 / Gen 4 customer using an HN9000 modem)   no worries, I've known Jim for years (10+) so if worse comes to worse, I can always call him up and have him give me a wee boost of warp speed every now and again..."Use the Force Jim! Use the Force!!"   **EDITED** to add UPDATE as of 8.33pm (PST) Downloads speeds are now back to averaging between 1-3 mbps. ... View more

Dont you just hate it when you get pocket aces and the you get bounced from the game and the sign says it is because your internet is to slow right when that hughes net commercial comes on ... View more

@BirdDog wrote: I have good 4G LTE right now but so expensive for large plans. If price comes down I may jump ship. The lower latency is nice, makes a difference. When I use the the small 3 GB allowance I have it is noticeably faster. My wife picked me up a new Galaxy 7 on Black Friday special for $49. When I transferred my service to the new phone, I was very surprised to find dang fast 4G LTE instead of 1xRtt (9 miles from tower). I also learned when reading the new box, I now get 10 GB/mo instead of 3. Very nice but all I can do is feed a single computer on my network because the reseller don't allow hotspotting or tethering like real Vz.  Klink with spoofing or Klink with a VPN are safe and work well. I get anywhere from 3 Mbps to 16+ Mbps. Not sure if that fluctuation is due to traffic or my location. Either way, it's a lot better than 100 kbps on 1x and a nice supplement to my Hughes allowance since I can use it to feed my TV, etc. ... View more

@maratsade wrote: They've given awards to Hughesnet.  But I'm sure they can use the big chuckle.   @WT4FEC wrote: Federal Communications Commission   That's actually who I filed my compalint with, but this forum doesn't allow the acronym for that agency to be used in a post.   It's really odd after I filed my complaint my 25 meg service could hit over 40 meg with a 25meg download at testmy.net during the day.   12/17 8:10 AM EST   After I received a call from HN on the 20th the connection went back into the tank. Wayne       ... View more

Hi bsmcarthy,   After running diagnostics I could not find any problems with the HughesNet equipment. A connectivity test showed that there are 2 Apple TVs connected to the HT2000W by wi-fi. There is also a Netgear R7000 Nighthawk connected on the LAN port. If the Netgear router has the wi-fi bands turned on, this is definitely going to cause an interference problem with the HT2000W, because our modem's wi-fi is still enabled. This will be a problem, even more so, if the wireless frequencies are trying to use the same channel.    I understand that you cancelled your service already, but since it is going to remain online until the end of your billing cycle, it may be worth a try to power off the Netgear router entirely and see if that makes a difference. Please note that if you have Video Data Saver enabled on your account and have manually set your Apple TVs to stream in a high definition, you will experience buffering. You can eliminate that issue by disabling the Video Data Saver feature on your HughesNet account, but please note this will use up your monthly data faster than lower definitions.   Since you have already ordered the cancellation, I am not sure if the technician will still go out, but if he does I would like to set the expectation with you that from my investigation here, there is nothing the technician would be able to do with the HughesNet equipment to resolve your concerns. The dish is pointed well and the modem is performing as it should.    Thank you, Amanda ... View more

I was told Beam 82 also has performance issues during peak hours.  I know that I am.  I am still awaiting the promised fix. ... View more

0101 is a crappy gateway...  ... View more

@pswired wrote: Yes, if you have a way to use a dynamic DNS service to update your IPv6 address, that will work. However, the DDNS client in my Hikvision DVR doesn't appear to be IPv6 enabled.    Thanks 🙂   My Hikvision DVR seems to have the IPv6 settings, but they are greyed out. I'll have to see if they can be enabled. ... View more

I have seen a significant degradation during the evening as well, and that does affect performance.  I know they're working on this and they'll fix it.  In the meantime, hang in there!   ... View more

@wildcats198308 wrote: Connection and service is horrible...  Most things are taking forever to load.  Can’t browse posts on Instagram let along watch the videos posted or anything.   I did a speed test around 7 pm which was about 6 Mbps.  Just now did another around 8 pm which was 731 kbps.      http://testmy.net/db/0n8T9hltq   SMH.  And when you look at the graph for that test it's all over the place.  I really hope they can figure out the issue and get it fixed soon.  Evening slowdowns are one thing, but that's just plain awful.  ... View more

Hi pswired   I did not hear anything this morning, but the day is still young. I will try to get in touch with the engineers working on beam 68 to get an update for everyone.   Thank you Amanda ... View more