Forum Discussion
Beam 66 Slow
- 8 years ago
Did get a service tech visit this weekend. Some adjustments were made and my speeds are back to being in 20mps range almost always.
Very happy so far. Can stream video again pretty consistently.
-BT
 
Good morning Bugman2112,
Welcome to the community and thank you for posting. I ran diagnostics on your site to double-check on the equipment, as as you noted, that still is fine. I would like to get some testmy.net speed tests so that if necessary, I can let the engineers here at corporate know.
Please create a testmy.net account and run 3 tests when you normally experience a slowdown. Post your test results link here in your thread.
Please keep in mind that Hughesnet will only accept testmy.net and the official Hughesnet speed test results. Tests from other sites like speedtest.net are not accepted due to the compression technologies and latency that satellite deploys.
Most important points to remember during this test:
-do the tests while directly connected to the HughesNet modem with a LAN cable (NO third party Router or Wireless devices can be used)
-use the 25MB size download test file ONLY if on Gen5 Service Plan
-space each test at least 5 minutes apart
-post your results URL here, it may look something like http://testmy.net/quickstats/C0RR0SIVE
For a more in depth guide on running the tests, please visit: http://customer.kb.hughesnet.com/Pages/7001.aspx
Your cooperation, patience, and understanding are much appreciated.
Here are three links of recent results when I was experiencing a slowdown. I actually have had much worse, but this should show what I am seeing. Also below are some more info...
- This was done directly connected to the router/modem. No WiFi
 - Signal strength and all other local diagnostics show no issues.
- Actually, I do need to correct the above statement. I sporatically do get the below error message. It does not alway coincide with slow speeds, but the error code does randomly. While on live Tech support, they are aware of this code, and have showed me how to "clear MBX" on my router control panel screen. This action does not permanently clear up that error code.
 30.3.4 -- Web response time is longer than expected 
 - no one else at my home is on this network. So no one else is using this Internet source.
 - I have run this speed test at other "non-peak" times, such as early morning and middle/night. The speed is incredibly fast and consistent at 25 to 40 MPS. I am not an expert, but having dealt with Satellite Internet in the past, this really seems like a traffic issue.
 - I am on Day 5 of a 3-5 day call back as I was escalated to engineers last week. I guess I should call back tomorrow if I don't here something?
 
Related Content
- 2 years ago
 - 5 years ago
 - 9 years ago
 - 3 years ago