Forum Discussion
VLAN support on HT2000w Gen 5?
Not sure why the router must support vlans if you have a higher end switch?
I suspect the Unifi swtich 8-150w is a Layer 2 switch, and not Layer 3 capable? If that is the case, then you're actually probably still gonna have to buy a third party router that supports vlans... The HT2000w from what I can find, doesn't handle vlans.No VLAN support on the HT2000W. You'll need to configure your guest SSID to be on the same VLAN as your main network (the Unifi APs will isolate guests from the LAN through filtering in the AP if you enable that feature) or add a better router downstream of the HT2000W.
No VLAN support on the HT2000W. You'll need to configure your guest SSID to be on the same VLAN as your main network (the Unifi APs will isolate guests from the LAN through filtering in the AP if you enable that feature) or add a better router downstream of the HT2000W.
