Sorry to be yet another customer complaining about the quickly used data allotment and subsequent TERRIBLY SLOW SPEED. For us, data is used in about 3 to 4 days of our billing cycle. So that's about 10% of a given month at acceptable speed and 90% with TERRIBLY SLOW SPEED. It's torturous. I know what you are thinking. Just direct this customer to the data usage advise given to everyone else. I've read it. I understand it. We have tried it. We've also tried unplugging and turning off all household devices when not used, yet our data consumption is hardly affected. None of it is really feasible or practical. Especially considering an engineer, a teacher, and highschool kids in the home who all rely heavily on internet service. There seems to be no other option for us living this far out in the country, and I'd like to think your company isn't taking advantage of that by offering tokens to purchase. I'm begging for better service. When our data resets life works great for a few days. What can you do for your customers to extend this period of high speed service? How about a plan that provides high speed without a data limit? I'd be willing to bet your revenues would explode. Another added benefit would be far fewer customers complaining and negative reviews. I think your customer service is fine. Everyone I've encountered is very helpful to the extent they can help. It's your product that needs real improvement.
The data limits are in place due to having a finite throughput that is much less than that of ground based services. The system can't support unlimited plans. To use an analogy, HughesNet is a two lane country road, while ground based services are 20 lane highways. Offering unlimited plans would be like trying to drive 50,000 cars per hour down a road that can handle no more than 5,000. It would cause a digital traffic jam. And the reason for that would be streaming, as that is the number one thing people would do if they had unlimited plans. It could get to a point that Google's home page would time out before opening, and that's one of the most basic pages there is.
IOW, unlimited plans can't be supported, and HughesNet isn't going to offer what they can't support. They only offer what they can.
Tokens, which will give you more data, don't affect the system like unlimited plans would because the number of people that buy them and use them at any given time is relatively small, not putting much of a dent in the available throughput.
Because you have apparently read the posts concerning data and don't want any further advice, I'll refrain from anything further.
AMEN to that! Great post! I gave up a constant speed of 10Mbps with Century Link for this kind of crap. I have only had HughesNet for a little over a month, but without a doubt this was a mistake I regret every day I use it. I run out of my allowed usage within the first week. Never was told this was the way they do business. Never knew about the data limit and was told by the sales rep I could stream movies at my service level. It was either a lie or the rep knows nothing about streaming movies. Now they tell me I have to buy more tokens????...or wait a few more days to get my 'promised' full allotment of 25 Mbps restored. How the heck do they get away with this type of misrepresentation in promoting their service?
Good morning RTL,
Welcome to the community! I can understand how frustrating it can be when something unknown is using up all your data. In case you might have missed this thread, this is the one that shows you how you can start your unidentified data usage investigation.
If you need help, please start a new topic in the appropriate section.
Sorry I am new to this.
No problem. If it's been less than 90 days since your sales call you can request a review of it in the "myAccount and Billing" section, which you can do here. If it's determined that you were misled during that call you may have recourse regarding the Early Termination Fee when cancelling.
I'm not really sure what they mean by your radio speed transmission, but the most likely cause of you not being able to attain 1-3Mbps speeds while subject to FAP is beam/gateway load. Your beam, or gateway, may be highly loaded with customers, which can cause the speed to be lower than what it might be otherwise.
I've never been in FAP, myself, so I can't say what my speeds are while in that state, but I know from others that it varies considerably. Some people get decent enough speeds to still be able to stream in lower definitions, while others see speeds that are below 1Mbps. It all just depends on their beam and/or gateway.
Though I doubt it would make much of a difference, but you might see slightly higher speeds with a device that's directly connected with a LAN cable vs a WiFi connected device, but again, the difference will probably be minimal, at best.
One other thing you can try, and you may have better luck with, is power cycling your HughesNet modem. It may end up putting you on an outroute that is more lightly loaded. It's dynamic, meaning that if it does improve it will only be temporary, but it may help a little in the short term. To do so, unplug your modem at the wall outlet or the power brick (NOT at the back of the modem), wait for at least 30 seconds, then plug the modem back in. Then wait about five minutes for the modem to be fully back up and see if your speed has improved a little. This is one of the tricks that can sometimes help to improve the speed a little.
It's been a while since we last heard from you, so we will close this thread. If you still have concerns, please start a new thread and include a detailed explanation so we can better assist you.
The HughesNet Community is here for you
to find answers and ask fellow HughesNet
subscribers for help. This is a great
opportunity to discuss and share your
expertise to enhance your HughesNet
experience and that of fellow subscribers.
Visit the About the Community board for
information on how to get started with using