Forum Discussion
New Gen5 WiFi doesn't work reliably
I recently upgraded to the Gen5 system. I was excited that they now included a WiFi router. Everything seemed to work just fine when I first set it up. Both the 2.4 and 5 GHz seemed to work just f...
Good morning mmollinet,
Our engineers have recently rolled out the update to one gateway for observations before determining whether to deploy to all gateways. We will be checking in with the engineers daily next week for an ETA for the nationwide update release and let you know as soon as we have news to share.
Your patience and understanding are much appreciated.
Good morning mmollinet,
Our engineers have recently rolled out the update to one gateway for observations before determining whether to deploy to all gateways. We will be checking in with the engineers daily next week for an ETA for the nationwide update release and let you know as soon as we have news to share.
Your patience and understanding are much appreciated.
I am also seeing the 5G Wi-Fi network dropouts frequently with the newly installed Gen5 modem (less than one week old). Tonight I am also seeing a frequent disappearing act by the modem. Modem disappears from Ethernet, Usage Meter goes gray, all network connected devices Ethernet and Wi-Fi lose LAN and WAN connectivity for a minute or so. Then the modem magically reappears, along with connectivity. Gateway ID 16, Beam ID 87, Outroute ID 6.
Sunday night I powered cycled the modem. That seemed to have stopped the modem instability. BUT it did not revive the 5G Wi-Fi. There is still no 5G broadcasting itself Monday morning. I have disabled and re-enabled the 5G network but still no 5G network visible. I am close to asking HughesNet to revert me back to Gen4. This Gen5 modem is too flakey.
Just seconds after I posted the above message about the modem being stable it dropped offline from the LAN. When it returned on its own this time the 5G Wi-Fi network was visible. BUT as I was typing this message the 5G network disappeared again. I think "FLAKEY" is definitely the correct marketing word for HughesNet Gen5. Was it rushed to the market?
There are recognized issues with the 5GHz wifi crashing on the 2000W and I think it is being addressed.
I have had good results with resetting the modem by unplugging the power cord from the power brick, waiting about a minute, then carefully plugging it back in. You don't want to do this fast for several reasons, the most important is the possibility of creating your own power spike in the box.
It takes a while for the router to reboot after the modem reboots and associates, so best to leave it alone for 5 minutes or so while it stabilizes.
If it doesn't come back at that point, go back and reset it as I described above. It may take 2-3 tries before it sticks, but it will stick.
And, coming from Gen4 (and being somewhat critical of it, myself), I'd recommend staying with Gen5. It really is a whole lot better and dealing with some of these early glitches is worth it - my 2p.
