Forum Discussion
WPS button on HT2000w
Good Afternoon All,
I just received my Gen5 upgrade and all seems awesome so far. Installer was great and a familer face from the last time I had trouble. I am trying to connect my printer to the system, and failing, when I push WPS button nothing seems to happen. Button has no decernable click just feels mushy and no light comes on or blinks. There Is no indicatation of it working at all. Is this normal? I know my printer does not see the router after I push the button.
I appreciate any help.
I personally have a dislike for WPS buttons... It's always best to enter the password of the wifi network when trying to connect...
That aside, your device may not support the Wifi Encryption method the HT2000w uses by default, this could be due to the age of the device, or software of the device. In the case of a Wireless adapter for your computer, please make sure you have the latest drivers installed. You can usually download the drivers from the manufacture of your computer, or of the wireless adapter.
Your device may not support the Wifi Encryption method the HT2000w uses by default, this could be due to the age of the device, or software of the device. In the case of a Wireless adapter for your computer, please make sure you have the latest drivers installed. You can usually download the drivers from the manufacture of your computer, or of the wireless adapter.
To change from the default WPA2 AES encryption method to WPA/WPA2 TKIP+AES mode, please follow the steps below.
1: In your browser go to http://systemcontrolcenter.com or http://192.168.0.1
2: On the left hand side, click on "Wifi Settings"
3: You will be presented with a logon screen, the default password is admin4: Select either 2.4Ghz, 2.4Ghz Guest, 5Ghz, or 5Ghz Guest, which ever network your device is trying to connect to
5: Select the WPA Mode and set to WPA/WPA2 - the Cipher Suite should change from AES to TKIP+AES
6: Click Save Settings
7: Try to reconnect your device using the proper password for the wifi network.
I've noticed this, too. That button definitely needs some better kind of tactile or visual feedback to let you know something is happening.
What I did was select the WPS Push Button option on my phone, then I gripped the modem to keep it from moving, firmly pressed the WPS button in as far as I could, and then held it for a few seconds. The phone connected almost immediately.
Thank you for the reply. I just tried that a few times in a row and still no love. Now I am not sure if it is the printer having trouble seeing the router in the modem or if the WPS doesn't work. All of my other devices connected without having to push the button. I have looked at and tried the possible solutions I have seen in other threads and nothing has worked yet.
If it helps any the printer is an HP 3052a
Have you tried just doing it Old School and manually entering the wireless password into your printer?
Other info: http://h30434.www3.hp.com/t5/Inkjet-Printing/WPS-Error-on-DeskJet-3050A/td-p/1605779
http://h30434.www3.hp.com/t5/Inkjet-Printing/How-to-connect-my-hp-deskjet-3052a-to-my-router/td-p/1801241
