About eco

Thanks for the update Remy 🙂   ... View more

 11.4 Update 7 Pm ... View more

11.4 12:00 Pm update, as yesterday, at noon speed was 10 MPS (Testmytest. Yesterday that didn't last, hope it does. Thanks ... View more

11.4 4:45 Am As shows in the speed tests, the speed problem has returned. After a good start for the day, speeds degraded to not be able to use Hughes test, tesymytest showed 2KPS. There was a short period about 2 Pm when the speed on Testmytest was 12 MPS , that was soon gone, and 2KPS returned for the rest of the day. Gone are the speeds (49MPS ) after the fix clearly something is amiss again. Hope it is resolved soon Thanks ... View more

11.3 4 Am speed 12 MPS (Hughes ) .7 Am Unable to get Hughes speed test-too slow. Testmytest showed .02 MPS. Looks like no Youtube this Sunday 🙂 Hope the same fix that worked for a few weeks works again? Thanks ... View more

10.15 - I am happy to report great consistent speeds since 10.10 . I thank all at Hughes for fixing the speed problem . ... View more

Great Improvement 10.11 @ 12:30 Pm. I have a pleasant surprise- the fastest speeds ever since I had Gen 6. It appears a solution was found for my speed problem 🙂 ... View more

Remy- I look at the state codes when I have the .03 Mps and less sometimes earlier in the day now, even at 12 Pm. The speed is too slow for the Hughes test, so I use Testmytest, the results are nearly the same, but theirs does work. The state code is 0.0.0 , thanks for your reply. I am guessing I'm not the only one on this beam with the problem, why I posted in the discussion forum last nite. Thanks again 🙂 ... View more

Having poor performance with Hughes Gen 6 on my beam, speeds are below 1 Mp after noon , and unusable after 7 Pm, would downgrading to Gen 5 give me better performance? I had better consistent over all speeds with Gen 5. 5 was better than 4 , but when 6 works well (at 4-5 Am) , but around noon, and especially evenings now , I cannot watch any youtube videos even at 250 dpi, the buffering problem. Did Hughes exceed the capacity of the Gen 6 satellite on my beam (19) I think. N Ca. ? I had a call from Hughes, and a courtesy tech visit, I see very erratic performance, but evenings for a while now , and even other times, the performance was better with 5 ,much less, or no buffering. Just a question, anyone else have this? ... View more

So the Gen 6 satellite cannot handle the congestion ? Performance is very erratic, a test result of 12 Mps, inbetween .03 , .02 Mps. Is this how it will be?  My wife said maybe Sun spots ? , but the data shows the same speed problem weeks before, when it's bad, I cannot use the Hughes speed test, only Testmytest. Thanks ? ... View more

Update- 10.5 9:15 Am Pst. Speed .03 Mps State Codes 0.0.0 Good last evening, now not so. ... View more

6:26 Pm Pst. What a change, fast, slow, fast again .Thanks ... View more

Update 10.4 - 5 Am speed- 40+ Mps 12:15 Pm speed 28+ Mps. I see the Hughes speed test is back. Good work all, thanks ... View more

My hopes are dashed 😞 State codes 0.0.0 ... View more

Wow, the fix is working! Thanks Hughes Techs 🙂 Hughes Speed Testing is still down.   ... View more

10.2 I noticed an outage this morning. When I tried later, Hughes was back. I tried a Hughes speed test, and had a 404 error notice. Under that was a link for the speed test vendor and subscription prices. Will the Hughes speed test be restored, or are we left with testmytest.com for speed tests? That tested 26+Mps. I will try later in the day to see if the speed problem continues. Thanks. ... View more

Thanks Remy, as usual, always the best !   ... View more

Monday evening... It's 6:30 Pm . Do you know where your internet speed is ? State Code- 0.0.0   ... View more

Well, again it's 12 Pm on a Monday, the Hughes speed test is unable to connect with the test server. Not a weekend football, or dwnloading movies time.The State Code is 0.0.0 . Testmytest speed test was under 200 Kps, or .02 Mps. The weather is clear in Ca, and South Dakota , where I was switched to after the Gen 6 install. Speeds are now below 200 Kps every day by noon now. I had 40+Mps Hughes speeds at 4:30 Am pst , which also is the norm. If this is a congestion problem, I can only look forward to it worsening, unless a solution is implemented. Thanks   ... View more

Yes, today, and yesterday, by early afternoon, Hughes speed tests do not function, tetstmytest.com do usually, but I have had some not load. The state codes are not bad- 0.0.0 , yesterday and before  12.1.12 , not today. Either way, you tube videos today buffered , it reminds me of Gen 4, 5. gen 6 has been good, but now , after non or so, not good. At 5 Am or earlier speeds are 30 mps and better , by noon now speeds are abysmal. The call I had from tier 4, Ephraim  admitted they know there are problems. I hope they can find a solution. If it is congestion again, as with Gen4, 5, it is what it is. What can be done?  Thanks for your reply. ... View more

As of 2 Pm pst 9.28 Testmytest speed is 300 mps down to 175. The state code is 0.0.0 . Is the problem congestion, over subscriptions to Hughes, or a technical problem? I so enjoy the ads on Tv for Hughes 😞   ... View more

6.27 7Pm pst I was unable to run Hughes speed tests, after slow speeds. I was unable to post here . The state code was 12.1.12. This is the usual now in evenings. Mornings service is restored, with 30+ mps. It appears congestion is the culprit ? ... View more

The last few days, starting at noon, and in the afternoon, evening, even a downtime for about 5 mins . I have had slow speeds. At 4:30 pst , I noticed problems, I used Testmytest speed tests- 3 all under 300 mps. A state code  on the control Center showed 12.1.12 . A search showed this code as a transmit problem , the post date was 2 years ago. Are the gen 6 modem state codes the same?  I appreciate the response from Hughes regarding this degradation of service. Thanks   ... View more

Sadly degradation of speeds tonite before 7 Pm pst. Hughes wasn't able to perform a speed test. Testmytest speeds - ... View more

Update 9.19 I test in the mornings before 4:45 Am pst, and get 37mps or better. This is consistent. On 9.18 evening- We had an outage for a few minutes at 7:20 pst. After restoration, I tried a Hughes speed test , I was unable to perform- too slow. I went to testmytest.com the results-   ... View more

9.13.24 I have had 2 calls from Hughes tier4 support. Javier yesterday,  and Ephraim today. It appears our beam is having some congestion problems (who knew) ? with all the ads (ugh). No Mas ! Ephraim had me reset the modem, and check the state codes, he was great. I have a new pin for next week, and the tier 4 phone #. I cannot say enough how great Hughes has been for me. I have never had such a support response (Dish Tv also great) , but Hughes- Wow. Thanks to all who are trying to get it right. You are the best! ... View more

Remy- the state code was 0.00 Here's a summary- Thanks ... View more

Today-9.5 report shows poor performance. Last nite very slow, this Am markedly slow compared to other mornings at this time. No other apps were running. I doubt congestion at 4:40 Am Pst . What's up? Thanks ... View more