Forum Discussion
Setting Up PRTG Network Monitoring on HT2000W
I am attempting to set up a bandwidth/traffic sensor for the HT2000W on my installed PRTG Network Monitor program (Paessler AG). I have been advised by their technical support staff that the SNMP (Si...
I don't think the HT2000W supports SNMP (at least from the user LAN). I tried to snmpwalk my modem at its wifi router IP and at 192.168.0.1 and got no response.
I had the same issue. What I ended up doing is setting up an PRTG Packet Sniffer with the "DestinationMAC[00-00-00-00-00-00]" set to the MAC address of the Wireless/Lan of the HT2000W.
