Forum Discussion
HT2000W's 5Ghz radio not working.
- 8 years ago
Okay. Update.
The neighbors have a newer Lenovo Thinkpad that most definitely does have the ability to connect using the 5Ghz band. It was brought over. It turns out my modem is fine. It connected without issue. We didn't really try anything with it other than just going to Google and doing a quick search. That was enough, though.
I feel like a schmuck. LOL. :(
Care to list the exact model of wifi adapters/devices your using that can't see the 5Ghz band?
If it's a draft varient that those devices support, they may not be able to connect to any 5Ghz system.
My Acer has a Qualcomm Atheros AR956x adapter, which is supposed to work at both 2.4Ghz and 5Ghz, but may not be using the 5Ghz band in this particular system.
The Dell has a "Dell Wireless 1705 802.11b|g|n" adapter, but it may only work at 2.4Ghz.
My Sony TV has a b|g|n card, but after further reading it only works at 2.4Ghz.
So, as it turns out, it's possible that none of the three things I have will connect to 5Ghz, so that may actually be the problem.
I guess I should have done a little more research.
- wildcats1983088 years agoTutor
I'm pretty sure my 5Ghz worked, I think I did speed tests with every available connection right after my system was installed.
GabeU You say you have no difference in download speeds between Wireless and Wired?? My speeds are different! I get 40-50 on wired and 15-25 or so with wireless.... this is quite a bit of a difference. So I would like to know why my speeds are slower plus is there anything I can / should do to improve the speeds.
I am currently using my own Router but I also tested with the built in WiFi as well... I will do more tests sometime later this weekend or next week to see if they are still slower.
- GabeU8 years agoDistinguished Professor IV
wildcats198308 wrote:I'm pretty sure my 5Ghz worked, I think I did speed tests with every available connection right after my system was installed.
GabeU You say you have no difference in download speeds between Wireless and Wired?? My speeds are different! I get 40-50 on wired and 15-25 or so with wireless.... this is quite a bit of a difference. So I would like to know why my speeds are slower plus is there anything I can / should do to improve the speeds.
I am currently using my own Router but I also tested with the built in WiFi as well... I will do more tests sometime later this weekend or next week to see if they are still slower.
How old is the device you are connecting with and using for the speed tests? It's possible that there is an issue with the wireless network card, or even a setting with such that needs to be changed. Perhaps a driver for the card? Interference with the signal is also a possibility, whether from range issues or something else. Do you have an older house that may have lead paint on the walls?
Whether I use the built in wireless router of the HT2000W or my older Netgear router it makes no difference. The speed is still the same as wired.
- Gwalk9008 years agoHonorary Alumnus
Wildcats,
It's kind of hectic here at the moment but in the next day or two I will try to make up a chechklist of items for you to look at.
Browser settings and plug-ins can be discounted as well as extentions as those items would apply to both wired and wireless.
- Gwalk9008 years agoHonorary Alumnus
Wildcats,
Here is a good overview of things that can affect wireless speeds:
https://turbofuture.com/computers/Improving-Performance-on-a-Wireless-Internet-Connection
Here is another that delves into wireless encryption modes and talks about 'mixed mode' slow-downs.
https://www.howtogeek.com/204697/wi-fi-security-should-you-use-wpa2-aes-wpa2-tkip-or-both/
- wildcats1983088 years agoTutor
My laptop is pretty old and has the original WiFi adapter. I also have done tests with my tablets (Google Nexus 7 and Samsung Galaxy Tab A -- The Tab A is only a year old) I get the same slower speeds with everything I believe. My Drivers are all up to date as far as Windows Updates shows. My Laptop Wireless adapter is Dell Wireless 1505. My Modem and Router is in the same room that I have been doing all Speed tests in. My house is older but with being in the same room I dont see the Walls or anything else being a problem being in the same room as the Router.
Like I said I will do more tests at a later time, this weekend was kinda busy. Plus now I am over my Data allowance (go figure -- darn kids, nephew did some updates on PS4 yesterday morning) I was using more data than normal myself just to get some things downloaded plus we just got new Cell Phones on the 10th which needed updates and apps installed. My 20 day resets ended on the 9th. So ended up using 20 GB in about 4 days days. I wasnt expecting all the PS4 updates or Phone updates. Now I will be slowed for 6 days :smileymad: . (I did tell nephew right after Gen5 was installed that we will have daily resets and figured he would do PS4 updates and download stuff but I guess he never did the updates!).
I did a few speed tests at different times yesterday and was getting speeds of 2.85 - 2.94 Mbps download and 2.8 - 3.2 Mbps upload. Not bad at all. Around 5:20 PM I did have speeds around 1.5 Mbps - Figured it was some slowdown. Today I ran a few speed tests over WiFi and Wired to see if they were the same and was getting around 1.5 Mbps download. I had to unplug the modem and plug it back in and was back up around 3 Mbps download. Todays tests were all about the same speeds using Wired and Wireless with my router and the built in router. I did have a few issues yesterday with using multiple devices at once, (playing 8 Ball Pool on mobile devices together)...
**I typed alot of this message yesterday and had to go outside for a while and came back and finished the message and went to post and here was auto signed out so the message didnt post -- luckly the majority of the message was saved in Drafts so I didnt have to retype it all.**
- maratsade8 years agoDistinguished Professor IV
"Whether I use the built in wireless router of the HT2000W or my older Netgear router it makes no difference. The speed is still the same as wired."
Ditto.
- wildcats1983088 years agoTutor
So, I am still confused with my speeds and how to set up my Router. I tried changing the channel (I tried channel 11 and then 7). The first speed test I do will have faster speeds but then if I retest 30 seconds later the speeds drop to around 25 Mbps. If I dont make any changes to my router settings but just click save my first speed test is fast and then 30 seconds later slower. I tried the built in Router and speeds stayed above 38 Mbps. I tried turning off all Radios in my router but one and still got the same results.
My router only has the following Encryption modes WPA2 PSK -- WPA PSK -- and WEP...... I assume WPA2 PSK is what I should use?
- wildcats1983088 years agoTutor
I figured I would try to completely restore my router to see if that would help. I used the default WiFi settings with the default SSID and a random password. I did a few speed tests and they all seamed higher. I was entering quota limits for all my devices from a screenshot prior to restore and ended up having to restore to a backup file which I made before restoreing the router because I did not reconize a MAC address. Speed tests are back in the 20's. After I get everything wrote down I am going to do another complete restore and then manually enter everything and hopefully my speeds are all higher.
Check out this speed test that I got.....
- GabeU8 years agoDistinguished Professor IV
wildcats198308 wrote:Holy smokes! If only that were a legitimate Hughesnet speed. Can you imagine? :)
- tlcfl8 years agoFreshman
I was having the same problems and made one change to get it working. (Apologies if the solution has already been posted.)
I simply changed the WPA Mode to "WPA/WPA2"
and
Security Type to "WPA-Personal"
It's now visible to all my devices (new and just a little "old").
Related Content
- 5 years ago
- 6 years ago
- 12 months ago
- 4 years ago