Forum Discussion
Intermittent internet loss Status Code 12.7.1 A transient problem has occurred
Hi John,
I really appreciate you continuing to monitor your performance over the weekend even though you're getting Gen 5 Monday. Your feedback would be useful to our engineers and would further validate that the fix was effective.
Also, thank you for your compliment, it means a lot to me.:cathappy: Don't hesitate to post back in the community about your Gen 5 experience, and let us know if you have any other concerns.
Hi John,
Welcome to the community and thanks for posting! I ran remote diagnostics on your site and all looks fine, no alignment issues either. We do want to monitor your system over the weekend, however, to see if this intermittent connectivity persists in the morning. To do so, please don't reboot your HughesNet modem so we can check your logs next week.
Please post back if the intermittent connectivity happens again in the mornings.
Your cooperation, patience, and understanding are much appreciated.
Another instance of loss of internet just happened today, Sunday 3/12. this time at 5:25 pm CDT (versus 6 PM CST yesterday). Same thing -- system light out and came back by itself after about five minutes. System Status of the modem indicated "12.7.1 - A transmit problem has occurred.". This is the same problem that has been happening only MUCH less frequently than it was while I was calling Technical Support by phone. In those cases, it was happening 4 - 5 times per hour for extended periods of time. However, this is ostensibly the same problem as that.
ChicagoJohn wrote:Another instance of loss of internet just happened today, Sunday 3/12. this time at 5:25 pm CDT (versus 6 PM CST yesterday). Same thing -- system light out and came back by itself after about five minutes. System Status of the modem indicated "12.7.1 - A transmit problem has occurred.". This is the same problem that has been happening only MUCH less frequently than it was while I was calling Technical Support by phone. In those cases, it was happening 4 - 5 times per hour for extended periods of time. However, this is ostensibly the same problem as that.
It's interesting that both you and MSmith are located in Illinois and having the same problem. You both might be on the same beam (21 or 22, perhaps). I don't know if this is just coincidence or not, but it's still interesting.
GabeU wrote:
ChicagoJohn wrote:Another instance of loss of internet just happened today, Sunday 3/12. this time at 5:25 pm CDT (versus 6 PM CST yesterday). Same thing -- system light out and came back by itself after about five minutes. System Status of the modem indicated "12.7.1 - A transmit problem has occurred.". This is the same problem that has been happening only MUCH less frequently than it was while I was calling Technical Support by phone. In those cases, it was happening 4 - 5 times per hour for extended periods of time. However, this is ostensibly the same problem as that.
It's interesting that both you and MSmith are located in Illinois and having the same problem. You both might be on the same beam (21 or 22, perhaps). I don't know if this is just coincidence or not, but it's still interesting.
Thanks for making that observation. At this point it seems to make sense to grasp at any straw that presents itself. Liz said she would be looking further into this, so I'm reporting each instance and not rebooting the modem as she requested. Maybe the fact that MSmith is in Illinois too will be of help to Liz in diagnosing the "A transmit problem has occurred" issue.
Seeing it often here too! That and 12.1.9 which gives same error (Transmit problem occurred). So you are not alone, and this to me doesn't seem to be a isoltaed thing, many may not even know and think it's just a turbo page problem that fixes itself "in a few" like we're already used to expecting
I notice it when I "think" the turbo page is down, so I head to the SCC/192 page to reset the turbo page or check it out etc. I notice is sometimes in the state codes, at the time and or in the past. And I see it from the last error state code at the top/middle too. Before going into advanced system section I can tell there is a problem from the "System Status" link (First green square), after clicking that at the top state code section I see yellow triangle error icon and transmit error or uplink error etc.
In code history I see uplink error looks to most often near the times I tend to notice the issue. These are the two codes out of the norm for us that give "uplink error"
0000-4000-0000-0007
0000-0000-0000-0049
