Forum Discussion
I have been dealing with this problem since my installation back in April. I have had enough! Last night I called and asked for my equipment to be pulled out of here, but was talked into one more chance for engineering to attempt a fix. For instance, I just ran a series of 5 tests (25M down/4M up} and got results ranging from 13.9 to 22.4M down and 1.6 to 2.1M up. Why such a large variance over a 25 minute time frame?
Last night I was running in the 1 to 3M down range. Same weather conditions; no other variables that I can see.
What GabeU is suggesting regarding only one device being connected, and for that one device to be connected via Ethernet cable is not a "real world" condition for me, nor would it be practical in my case. I don't recall these parameters being specified in the sales pitches in order to get me to sign up.
No offense meant Gabe.
- maratsade7 years agoDistinguished Professor IV
"What GabeU is suggesting regarding only one device being connected, and for that one device to be connected via ethernet cable is not a "real world" condition for me, nor would it be practical in my case. "
It's not a real world condition; it is a testing condition and it is done to isolate the modem to ascertain whether the problem is in the modem. It is done for testing purposes only. For regular use, you don't have to stick to those parameters.
"I don't recall these parameters being specified in the sales pitches in order to get me to sign up."
They wouldn't have been, as they're testing parameters used to evaluate the system when there's a problem.
- GweRDSKNS7 years agoFreshman
Here are my test results taken when directly connected to the HughesNet HT2000W modem with only 1 PC, gigabit ethernet, WIFI is disabled. Download was 25M and upload was 4M. These results are pretty much self explanatory, the internet service is sub-par. I still haven't received a call from the so called "Advance Tech Engineer" that support told me would call me tonight, or any other night they were supposed to call. I also called the installer and got no answer, left a Voicemail but got no return call either. As for right now, I will call the Better Business Bureau and my news station to let them know how HughesNet treats new customers after they get your money. I asked support to send a replacement modem, as I even paid for express repair, but that was a waist of my money too. Very disappointed.
https://testmy.net/stats/?&t=u&l=25&z=1&q=GweRDSKNS
- GabeU7 years agoDistinguished Professor IV
Two things...
First, this is a different avenue of receiving help. This is not the phone help. The help you receive here will come from corporate based reps who have direct access to engineering.
Secondly, just so that you are aware, when you submit a complaint to the Better Business Bureau it stops any and all help that you can receive here, or by the phone, for 30 days. Just keep that in mind. It would be unfortunate for you to have just discovered the best avenue for receiving help for your issues only to then have the door to that help closed to you for 30 days. Still, of course, you're free to do as you wish. I only wanted to make you aware of how it works.
If you instead decide to continue forward with the help here, the tests you have run will be very helpful to the reps. Again, they will be back on Monday.
- GabeU7 years agoDistinguished Professor IV
swjohnson wrote:What GabeU is suggesting regarding only one device being connected, and for that one device to be connected via Ethernet cable is not a "real world" condition for me, nor would it be practical in my case. I don't recall these parameters being specified in the sales pitches in order to get me to sign up.
Troubleshooting is not meant to mimic a "real world" condition, for you or anyone else. It's troubleshooting. It's meant to discover the cause of a problem. As alluded to by maratsade, testing when directly connected gives a baseline result, without which troubleshooting is not as precise and can be a much more tedious task. Testing with a direct connection is the most basic connection there is. The fewest moving parts, if you will. Testing via WiFi doesn't tell you whether the speed problem is with the actual service, the WiFi, or the device the WiFi. WiFi connected devices are susceptible to a multitude of different things that can affect speed. A baseline connection isn't. Troubleshooting is a process of elimination.
When your Verizon home phone service is having an issue the phone guy doesn't troubleshoot with your cordless phone, nor ANY cordless phone. He directly connects to establish whether the problem lies with Verizon's service. If not, he checks the lines in your home. If not, he checks your cordless phone. He doesn't start with your cordless phone, even though that's what you use every day. And Verizon was chosen arbitrarily for the purposes of my example. I don't know what home phone service you have, nor that you even do.
swjohnson wrote:No offense meant Gabe.
None taken. Perhaps you now better understand why speed issue troubleshooting is performed the way it is.
Edit: By the way, the variance in the speed of your service is most likely due to customer load on your beam and/or gateway, which varies from one moment to the next. This is one of the reasons why speed cannot be guaranteed. You speed will tend to be most affected by customer load in the evenings.
If YOU would like to take advantage of the help on this Communinty for your speed issues please start a new topic to begin the process of figuring out what's going on.
Related Content
- 7 years ago
- 8 years ago