Solved! Go to Solution.
Using a computer directly connected to the modem (e.g., using a lan cable, not wifi) you should still be able to get the state code from this page.
Thanks for reaching out. Mark's suggestion will help you find the state code. This is what we use to help troubleshoot your technical concerns. I just ran diagnostics on your site and I'm unable to communicate with your modem. Let's replace it and see if we can get you back online. I'm shipping you a complimentary modem, please expect it in a few days. Here are instructions on how to replace your modem. You can use the box in which the new modem arrives to return the old one; there's a return label in the outer pouch.
We use UPS to ship. 🙂
Liz had given you specific instructions, with pictures, on how to connect the ATA to the modem. You need to connect the yellow Ethernet cable from any LAN port on the modem to the yellow WAN port on the ATA.
Good morning tigersdad5,
Glad to hear the new modem got you back online! Regarding your Voice concern, as maratsade pointed out, we've already started troubleshooting that in your original thread here:
Please click on the link above, review your thread, and proceed where we left off.
Your cooperation, patience, and understanding are much appreciated.