Good morning Rob,
Thanks for posting, we'd like to help address your concerns. Let's start with troubleshooting your internet, since your HughesNet Voice relies on that internet connection to function. I ran diagnostics on your site and the HughesNet system is working normally. I also checked the modem temperature and it's actually below your modem's average temp. Do not block any of the modem’s ventilation openings. Leave six inches around the top and sides of the modem to ensure adequate ventilation. Do not put the modem near a heat source such as direct sunlight, a radiator, or a vent.
For testing purposes, please directly connect your computer via LAN cable to the modem and let me know if you're noticing any service degradation. If you find that the service seems slow even while directly connected, please run some testmy.net speed tests so we can evalulate further.
Create a testmy.net account and run 3-5 tests during different parts of the day. Post your test results link here in your thread.
Please keep in mind that HughesNet will only accept testmy.net and the official HughesNet speed test results. Tests from other sites like speedtest.net are not accepted due to the compression technologies and latency that satellite deploys.
Most important points to remember during this test:
-do the tests while directly connected to the HughesNet modem with a LAN cable (NO third party Router or Wireless devices can be used)
-disable the wifi (follow the steps here to access your wifi settings and uncheck the SSID Enable options from both the 2.4 and 5 GHz networks)
-use the 25MB size download test file
-space each test at least 5 minutes apart
-post your results URL here, it may look something like http://testmy.net/quickstats/C0RR0SIVE
For a more in depth guide on running the tests, please visit: http://hninfo.us/speedtest
If you actually lose internet connection, immediately go to your modem's System Control Center (SCC) by browsing to 192.168.0.1. Click on the System Status light at the top of the screen and note the state code. When working normally, the state code is 0.0.0, otherwise you will see a different series of 3 numbers in its place. The state code can help us focus our investigation.
Your cooperation, patience, and understanding are much appreciated.
